SALES+44(0)1924 528000
0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

RSI Videofied

Set Descending Direction

   

Items 1 to 10 of 47 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. XV-IP 210 GPRS

    Key Features:
    • S2View® : Spread Spectrum, Videofied, Interactive AES Encrypted Wireless technology provides optimum signal integrity and security.
    • Compatibility : works with all Videofied ® wireless devices.
    • Supervision of all devices (except remote keyfob).
    • Tamper detection : 24-hour dual-tamper function provides detection for both cover and wall removal. Control panel also monitors all system device tamper switches.
    • Zones / Devices : 25 maximum.
    • Areas : 4 maximum. Area 1 predefined from factory for entry/exit delay. Areas 2, 3, and 4 can be configured as needed.
    • Access codes : 20 maximum, 4 - 6 digits; one installer access code for on-site programming only.
    • Configuration/Programming : on-site using alphanumeric keypads.
    • Communication : reports to central monitoring stations using Frontel.
    • Video verification : video resolution of 320 x 240 pixels, 0 lux sensitivity, 5-frames per second for approx. 10 seconds total recording time. 220K MPEG fi le.
    • History/Event Log : maximum 4,000 events stored in flash memory that cannot be cleared or erased.
  2. IDC210(BAT)

    Key Features
    • Up to 4 year battery life
    • Temperature rated from -10° to +40° C (14° / +104° F)
    • Wall and cover tampered
  3. SE200(BAT)

    Key Features
  4. Wireless technology provides optimum signal integrity and security
  5. Speaker providing output of 110dB at 1 meter up to three minutes, in alarm.
  6. Dual tamper
  7. Batteries Included
  • OSX200(BAT)

    Key Features:
  • Wireless interactive technology 
  • 100 dBA output at 1 meter 
  • 3 to 15 minutes output and flashlights duration 
    (according to local legislation). 
  • Flash LED light 
  • Wall and cover dual tamper detection 
  • Powered with 3 LR20 alcaline batteries- included : 4 years 
    battery life.
  • ISD200(BAT)

    RSI Smoke Detector + Batteries ISD smoke detector is a wireless, battery-powered device design to be used with a Videofied security system. The detector is embedded with a smoke detection module, a buzzer and a radio module.
  • ISMV200(BAT)

    Key Features
    • Spread spectrum S2 VIEW® radio protocol.
    • AES encrypted wireless system.
    • Bi-directional radio link between the panel and the devices.
    • CMOS camera sensor with 90° lens.
    • Night vision thanks to 2 infrared illumination LED.
    • Fresnel lens motion detection : 10m/90° detection pattern.
    • The camera sends a color video for lighted sites or black & white in night vision.
    • Dual tamper: wall and cover tamper.
    • CR123A Lithium batteries.
    • 4 years battery life depending on the detector activity and the environmental properties.
  • OMV-VX200(BAT)

    Key Features
    • Wiselink® Spread Spectrum, Videofied, Interactive, AES Encrypted wireless technology provides optimum signal integrity and security.
    • Camera : CMOS sensor with 90° wide angle lens. Resolution 320 x 240 pixels.
    • Supervised : Transmits a check-in/status signal to the panel every 8 minutes indicating the unique identification code along with the current detection sensor state, tamper condition, serial number, manufacture date, software revision, and battery status.
    • Lithium batteries : up to 4 years battery-life.
    • Night illumination: up to 12 meters using four infrared LEDs.
    • The camera captures a video segment less than 100 milliseconds after motion detection.
    • Device is fully weatherproof and can withstand temperatures from -20° to 60°C.
  • OSMV210(BAT)

    Key Features
    • S2View® Spread Spectrum, Videofied, Interactive, AES Encrypted wireless technology provides optimum signal integrity and security.
    • Camera : CMOS sensor with 90° wide angle lens.
    • Resolution 320 x 240 pixels.
    • Supervised : Transmits a check-in/status signal to the panel every 8 minutes indicating the unique identification code along with the current detection sensor state, tamper condition, serial number, manufacture date, software revision, and battery status.
    • Tamper : After setting the location of the device the tamper will alert on any movement of the device including opening of the cover or unscrewing from the mount.
    • Lithium batteries : typical 4 years battery-life.
    • Night illumination: up to 12 meters using four infrared LEDs.
    • Motion detector—dual-element, passive infrared with fresnel lens for up to 14 m wide, 90° coverage pattern (by default).
    • The camera captures a video segment less than 100 milliseconds after motion detection.
    • Device is fully weatherproof and can withstand temperatures from -25° to 70°C.
  • IMDC200(BAT)

    Key Features
    • Wireless technology for maximum security
    • Curtain detection lens (1m curtain width)
    • Dual tamper function
    • PIR motion detector
    • LS14500 SAFT AA Lithium battery for extended battery life
    • Transmits check-in/status signal every 8 minutes
  • IDC200(BAT)

    Key Features
    • Up to 4 year battery life
    • Temperature rated from -10° to +40° C (14° / +104° F)
    • Wall and cover tampered
  • Set Descending Direction

       

    Items 1 to 10 of 47 total

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    Newsletter

    Sign Up for Our Newsletter:






    * required fields