SALES+44(0)1924 528000

You have no items in your shopping cart.

Product was successfully added to your shopping cart.





Quick Overview

Key Features:

  • S2View® : Spread Spectrum, Videofied, Interactive AES Encrypted Wireless technology provides optimum signal integrity and security.
  • Compatibility : works with all Videofied® wireless devices.
  • Supervision of all devices (except remote keyfob).
  • Tamper detection : 24-hour dual-tamper function provides detection for both cover and wall removal. Control panel alsomonitors all system device tamper switches.
  • Zones / Devices : 19 maximum.
  • Areas : 4 maximum. Area 1 predefined from factory for entry/exit delay. Areas 2, 3, and 4 can be configured as needed.
  • Access codes : 20 maximum, 4 - 6 digits; one installer access code for on-site programming only.
  • Configuration/Programming : on-site using alphanumeric keypads.
  • Communication : reports to central monitoring stations using Frontel.
  • Video verification : video resolution of 320 x 240 pixels, 0 lux sensitivity, 5-frames per second for approx. 10 seconds total recording time. 220K MPEG file.
  • History/Event Log : maximum 4,000 events stored in flash memory that cannot be cleared or erased.


RSI Residential Control Panel with integrated Keypad and Prox Tag reader.

The XL GPRS alarm panel is a Videofied ® wireless, battery operated security system. The control panel is designed for residential and small commercial security applications where video verification is needed or desired.

The control panel is powered by eight 1.5-volt alkaline batteries that last up to four years, with normal system activity. A built-in siren provides status beeps. The embedded cell modem communicator reports to the monitoring station and and enables 2-way voice communication over cell to the monitoring station.

A dual-tamper function is active 24 hours, whether or not the system is armed. An alarm occurs if the control panel cover is removed, or if the control panel is removed from the mounting surface. 

With the embedded touchpad the user can arm and disarm the system. Under the TouchPad an integrated proximity card reader that can be used to arm and disarm the system without using the TouchPad. The proximity card/tag arming system is designed to maximize operator convenience.

Requires 4-8 x D Cell - Alcaline Battery - LR 20 >

Also Purchased


Sign Up for Our Newsletter:

* required fields