-
GENERAL DESCRIPTION
- The camera shall be an external colour / mono motorised IR dome camera with removable cut filter, black in colour and utilising a 1/3 INCH SONY CMOS CCD
-
VIDEO/CAMERA
-
Imaging Device:
1/3” Progressive Scan
-
Imager Type:
CMOS
-
Electronic Shutter Range:
1/5 - 1/50,000 second
-
Minimum illumination:
-
0.001Lux
-
0.0Lux (IR On)
-
Scanning: Progressive
-
Sync Mode: Internal
-
Image Control Settings
-
Day and night settings
-
Privacy zones
-
2D/3D noise reduction
-
Infrared:
-
IR Distance: 20m
-
IR Count: 15pcs
-
Lens:
-
Built-in, Motorised
-
Focal Length: 2.8 - 12mm
-
Lens: Manual
-
Focus: Manual
-
Video:
-
Maximum Resolution: 1080p
-
CONNECTION
-
Connectivity: BNC
-
Video Output: 1.0Vpp, 75 Ω
-
Transmission Range: 300m via coaxial cable
-
ELECTRICAL
-
Power
-
Supply Voltage: 12 VDC / 24 VAC
-
Power Consumption: <4.5W
-
Power Connector: 2.1mm Jack Plug Connector
-
MECHANICAL AND ENVIRONMENTAL
-
Construction Material:
Aluminum eyeball camera with base
-
Colour: Black
-
Dimensions (D x H): Φ120mm × 106mm
-
Weight: 750g
-
IP Rating: IP66
-
Operating Temperature: -10°C to 55°C (14°F to 131°F)
-
CERTIFICATIONS
-
CE
-
FCC
-
ROHS
EXECUTION
-
INSTALLERS
-
Contractor personnel shall comply with all applicable state and local licensing requirements.
2. PREPARATION
A. The network design and configuration shall be verified for compatibility and performance with the camera(s).
B. Network configuration shall be tested and qualified by the Contractor prior to camera installation.
-
INSTALLATION
-
Before permanent installation of the system, the Contractor shall test the system in conditions simulating the final installed environment
B. Contractor shall follow all Manufacturer-published guidance on proper installation and configuration of the camera.
-
STORAGE
The dome camera hardware shall be stored in an environment where temperature and humidity are in the range specified by the Manufacturer.