- CCTV Security
- Intruder Alarm Systems
- Door Entry & Access Control
- About Us
- Our Services
- Customer Support
- Contact Us
RSI XT Control Panel in IP rated box with built-in RF and GPRS booster antennas.
The XTO-IP control panel is a weatherproof, wireless, battery operated, hybrid alarm system. It is designed for outdoor commercial applications, featuring the XTO panel as two integrated long range antennas: one for 868MHz communications between the panel and peripheral devices and one for GSM communication from the panel to the Central Stations.
The XTO-iP GPRS alarm panel is a Videofied® weatherproof, wireless, battery operated security system. The control panel is designed for outdoor commercial applications (constructions sites, cellular towers, remote sites, substations...). The box is water-resistant and temperature-resistant. The control panel is powered by 4 LSH20 Lithium batteries that last up to four years, with normal system activity. A dual-tamper function is active 24 hours, whether or not the system is armed. An alarm occurs if the control panel cover is removed, or if the control panel is removed from the mounting surface. The user can arm and disarm the system by entering his code on the external keypad. A radio antenna is built in the system.
Supervised Wireless Technology The XTO-iP series, along with all Videofied devices uses patented S2View® - Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology, providing optimum signal integrity and security. Bi-directional RF communication between all system devices and the system control panel ensures high signal reliability. The panel supervises every device (excluding the remote keyfob) to monitor current open/close state, tamper condition, serial number, date of manufacture, firmware revision, and battery status.
Complete system configuration/programming can be done on-site using alphanumeric keypads. Easy to understand text on a two line, 16-characters liquid-crystal (LCD) display guides you through programming, prompting you for simple yes/no or data entry responses. Complete punctuation symbols allow for accurate website/IP address entries and device location naming.
The XTO-iP reports alarms and other system events by using the Frontel protocol. Frontel provides complete system reporting information and video verification to a central monitoring station set up with the Frontel alarm receiving software.
Incorporating MotionViewer™ into the security system allows for video verification of intrusion alarms. When the system is armed and an intruder trips MotionViewer™, the integrated camera captures a 10-second digital video clip which is sent to the central monitoring station by the control panel, which can forward them to an alert list.
Log The XTO-iP control panel records and stores all system activities and events (armings, disarmings, alarms, access codes entered, system programming changes, etc.) in flash memory, that cannot be cleared or erased. The log accumulates a maximum of 4,000 events. As additional events occur, the control panel automatically deletes the oldest event. This ensures the most recent events reside in the log. The history/event log can be viewed using an alphanumeric keypad or downloaded at the monitoring station.